Troubleshooting - IKEA LAGAN Handbuch

ENGLISH
Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
Warning! Danger of
electrocution! Disconnect the fuse
before you replace the lamp.
The lamp and the lamp glass
cover can be hot.

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation
settle on the food and in the
cavity of the oven.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
3. Turn the lamp glass cover
4. Clean the glass cover.
5. Replace the oven light bulb with a 25
6. Install the glass cover.
Possible cause
The oven is deactivated.
The fuse is blown.
The lamp is defective.
You left the dish in the oven
for too long.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
deactivate the circuit breaker.
counterclockwise to remove it.
W, 230 V (50 Hz), 300 °C heat resistant
oven light bulb (connection type: E14).
Activate the oven.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
14
Remedy