Connection; Operation - Canton Digital Movie DM100 Bedienungsanleitung

English

Connection

Please ensure that all electrical components are switched off before connecting. Your Digital Movie System has three optional inputs. in principle
it is enough to connect one of these inputs to your tV and all further devices to your tV. to achieve the best possible sound we recommend that
you connect your satellite receiver, Blu-Ray or DVD player directly to the DM system. the following options are possible, depending on the type
and fittings of the source used:
TV – Digital input (optical)
Modern tV devices have an optical audio output (toslink). Connect this with the
input marked "tV" on the DM system. this connection guarantees optimal signal
transmission and best sound quality.
Important: Remove protective caps from optical cable.
DVD – Digital input (coaxial)
to transmit the DVD sound signal connect the digital coaxial output of your Blu-Ray or
DVD player with the jack marked "DVD" on the DM system. to transmit the picture
signal your DVD player must also be connected to the tV. the input marked "DVD"
on the DM system can be selected if your tV does not have an optical output.
AUX – Analogue input
if your tV only has an audio output marked "Pre-Out" then connect it using the
shielded stereo RCA cable plugged into the analogue input on the DM system marked
"AuX". Otherwise this input can be used to connect video recorders or game consoles.
SUB – Analogue output
use this output when you want to connect an external active subwoofer. SuB Out
is not active in the basic setting and needs to be activated using the remote control.
See page 44 "extended sound functions".
40

Operation

Power
1
ON
Standby
DM disconnected from the mains – leD not illuminated (OFF)
Mute (muting)
2
TV DVD AUX Input (signal source selection)
3
Volume (volume control up/down)
4
Play Mode
5
Stereo
Surround – virtual surround sound for home cinema
Sound
TV DVD AUX
6
Bass
DIGITAL MOVIE
treble
Bluetooth
7
Connection with a Bluetooth
Memory Function
After the DM system has been temporarily disconnected from the mains it
SUB
automatically returns to the last mode selected. All settings (e. g. ON/OFF,
volume) remain in place.
– leD shines green
– leD shines red
– for music
– Adjustment via Volume control (+6... –6 dB)
– Adjustment via Volume control (+6... –6 dB)
Pairing
®
® Wireless technology enabled source
English
ON MUTE
STANDBY
STEREO BASS
SURROUND TREBLE
BLUETOOTH
PAIRING
Remote control
41