Samsung HT-J7500W Benutzerhandbuch Seite 17

TV Aspect Ratio
Lets you adjust the output of the product to the
screen size of your TV. (See page 51)
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray/DVD Disc.
Resolution
Lets you set the output resolution of the HDMI
video signal to BD Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number indicates the
number of lines of video per frame. The i and
p indicate interlaced and progressive scan,
respectively.
The more lines, the higher quality.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality if attached to a 24 fps compatible
TV.
~ You can enjoy the Movie Frame (24 fps) feature
only on a TV supporting this frame rate.
~ Movie Frame is only available when the product
is in the HDMI 1080p output resolution modes.
DVD 24 fps Conversion
Converts DVD playback to 24 frames per second
and outputs it via HDMI. This option is only
available when Movie Frame (24 fps) is set to
Auto.
✎
This feature applies to NTSC discs only.
Fit Screen Size
Lets you select the optimal size for the Smart Hub
or Screen Mirroring Screen.
HDMI Colour Format
Lets you set the colour space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
HDMI Deep Colour
Lets you set the product to output video from the
HDMI OUT jack with Deep Colour. Deep Colour
provides more accurate colour reproduction with
greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Simple Speaker Setup (HT-J7500W only)
Lets you configure the settings of the speakers
you have connected to obtain the best possible
surround sound.
 Normal Mode : Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind the
listening positions.
 Simple Mode : Select if you have put your
surround speakers in front of the listening position.
Downmixes the front sound to the surround sound
speakers.
✎
SFE, Virtual 7.1 will not operate when the
Simple Mode is on.
Speaker Settings
 Sound Output : Lets you select which speakers
are active, either the TV's speakers or the home
cinema's speakers.
 Settings (Home theatre speakers) : Lets you
adjust the following speaker settings and turn the
test tone on and off so you can test the speakers.
- Volume Level : Lets you adjust the relative
loudness of each speaker from 6dB to -6dB.
For example, if you like deep bass, you can
increase the loudness of the subwoofer by
6dB.
- Distance : Lets you adjust the relative
distance of each speaker from the listening
position up to 9 meters. The farther the
distance, the louder the speaker will be.
- Speaker Test : Begins a test to set the best
surround sound configuration. Press Stop
Test to stop the test while it is in progress.
17
- English
Sound