Removing The Door - AEG 47056IU Benutzerinformation

30 www.aeg.com
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that
the glass could break.

Removing the door:

1
When the cleaning procedure is comple-
ted, insert the oven door in the opposite
sequence. Make sure that you hear a
click when you insert the door. Use force
if necessary.
Removing and cleaning the door glasses
B
2
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
1. Open the door fully.
2. Move the slider until you hear a click.
3. Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the
door outwards first from one
side, and then the other.
11.3 Oven glass panels
The door glass on your product
can be different in type and
shape from the examples you
see in the diagrams. The number
of glasses can also be different.
1. Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.