Reset Function; Effect Adjust; Users Mode Set - Futurelight PHW-575 Bedienungsanleitung

Service setting
The password for this function is „050".
Adjust ventilation fans mode
With this function, you can adjust the ventilation fans mode.
• Select "Fan Voltage" by pressing Up or Down.
• Press Enter to confirm; the display shows "LOW".
• Press Up or Down to select "LOW" or "HIGH".
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Adjust fan speed
With this function you can adjust the fan voltage selected under ventilation fan mode even further. In this
way, you can select „Auto fans speed", „High fans speed" and „Low fans speed".
Display close time
With this function you can shut off the LED display after 1 to 59 minutes.
Select temperature designation
With this function you can select the temperature designation.
• Select "Temperature C/F" by pressing Up or Down.
• Press the Enter-button, the display shows "Celsius".
• Press Up or Down to select the desired degree between "Celsius" and "Fahrenheit".
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Initial effect
With this function, you can adjust with which value the respective channels will start.

Reset function

With this function you can reset the device via the Control Board. You can select the different Reset-
functions by pressing Up or Down.
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.

Effect Adjust

Test function of each channel
With this function you can test each channel on its (correct) function.
Manual Control
With this function, you can adjust the lamp more easily. All effects will be cancelled, the shutter opens and
the dimmer intensity will be set to 100 %. With the individual functions, you can focus the light on a flat
surface (wall) and perform the fine lamp adjustment.
Calibrate Values
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is „050".

Users mode set

User mode
With this function, you can create user defined channel orders.
Edit User mode
With this function, you can adjust the Preset user defined channel order.
52/110 00031413.DOC, Version 1.0