Samsung LE40D679M3S Bedienungsanleitung Seite 38

Advanced Features
Setting Up Anynet
¦
■ Setup
Anynet (HDMI-CEC) (Off / On): To use the Anynet
+
✎
When the Anynet
Auto Turn Off (No / Yes): Setting an Anynet
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
✎
May not be enabled depending on the device.
Switching between Anynet
¦
1. Anynet devices connected to the TV are listed.
+
✎
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎
Only when you set Anynet
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
Make sure to switch to an Anynet
38
English
+
(HDMI-CEC) function is disabled, all the Anynet
+
Device to turn off automatically when the TV is turned off.
+
Devices
+
(HDMI-CEC) to On in the Application menu, the Device List menu appears.
+
device by using the Device List.
+
Function, Anynet (HDMI-CEC) must be set to On.
+ +
related operations are deactivated.
+
SOURCE button, you cannot use the Anynet function.
+