Applying The Camera (Optional); Illumination - XciteRC Rocket 250 3D Bedienungsanleitung

Applying the camera · Illumination
AUX2 Button AUX1 Button
360 degree flips and rolls
Once you are familiar with the aforementioned maneuvers, you can venture to flips and rolls. Fly at least 1.5
m high, and then activate the PRO mode (see above). Then press the AUX2 button (3). A sound and 3D in
the screen (4) indicates that the mode is active. Now move the right control lever to the desired direction (5)
and the model rolls once around its own axis.
AUX2

Applying the camera (optional)

Make sure that the SD card is inserted in the camera. Otherwise the the camera is deactivated. Each tome
pressing the Photo button makes a photo frame, accompanied by a short beep. Press the Video button, the
video recording starts, also the camera icon appears in the display, accompanied by a Di-Di sound. Press
the Video button again to stop the recording.
Video button
Photo button

Illumination

Press the control lever to switch the lighting of the Rocket 250 3D on or off. Is the lighting on, a bulb appears
in the transmitter sreen.
XciteRC Rocket 250 3D
AUX1
3
LCD Display
L . H
1
LCD Display
L . H
ON: Video recording
OFF: Video recording stopped
1
LCD Display
L . H
%
E A S Y
1
4
3 D
%
P R O
2
%
E A S Y
2
2
LCD Display
L . H
%
P R O
5
21