Display Settings; Adjusting The Display; Bluetooth Settings; Bluetooth Name - PURE Evoke D4 Bedienungsanleitung

Display settings

Adjusting the display

You can adjust the brightness and time-out duration of the display for when the unit is switched on and in
standby. To change display options:
1. Press Menu, scroll to 'Display settings' and push the Select dial.
2. Now choose either 'Active' to change settings that apply when the unit is switched on, or 'Standby &
Sleep' to change settings that apply in standby and sleep.
Changing the display time-out duration
Select 'Duration' and choose from the following two modes:
Always on
The screen is always set to your preferred brightness level.
Timed off The screen is set to your preferred brightness level when a button is pressed and then
switches off after 7 seconds of inactivity.
Changing your preferred brightness level
Select 'Active brightness' and choose from the following options:
Automatic The brightness of the screen adjusts automatically depending on the level of light in the
room (default).
1–10 Turn the Select dial to vary the brightness level between 1 (very dim) and 10 (very
bright) and push to confirm your preferred setting.

Bluetooth settings

You can use the Bluetooth menu to make Evoke visible or invisible to other Bluetooth devices.
1. Press Menu.
2. Turn and press the Select dial to choose 'Settings'.
Turn and press the Select dial to choose 'Bluetooth'.
3.
Turn and press the Select dial to select one of the following options:
4.
On (discoverable)
On (hidden)
Off

Bluetooth name

To display the name that Bluetooth uses to identify Evoke:
Press Menu.
1.
Turn and press the Select dial to choose 'Settings'.
2.
3. Turn and press the Select dial to choose 'BT Device Name'.
EN
17