Using Optional Equipment; Auxiliary Audio Equipment; Card Remote Commander Rm-X114; Rotary Commander Rm-X4S - Sony CDX-GT232 Bedienungsanleitung

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
"FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until "AUX"
appears, and rotate the control dial to adjust
the input level (–8 dB to +18 dB).
12
AUX
AUX
Connecting cord*
(not supplied)

Card remote commander RM-X114

The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
DSPL
DSPL
*
MENU
PRESET
SOURCE
SOURCE
</,
–
SEEK
(SEEK –/+ )
SOUND
PRESET –
OFF
OFF
VOL (+/ –)
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
• DSPL (display) button
To change display items.
• </, (SEEK –/+) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
• SOUND button
The same as the select button on the unit.
• LIST button
To select PTY in RDS.
• M/m (DISC*/PRESET +/–) buttons
To control CD, the same as (1)/(2)
(ALBUM –/+) buttons on the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
* Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SE L
M O D E
D SP L
MODE
MODE
LIST
+
+
DISC m/M
*
(DISC /
+
SEEK PRESET
+/ –)
–
DISC
*
ENTER
ATT
+ ATT
VOL
–
D S P L
M O D E
S E L