Initial Setup; Selecting The Video Source - Samsung 8 Series Schnellstartanleitung

Initial setup

The initial setup dialogue box appears when the TV is first
activated. Follow the on-screen instructions to finish the initial
setup process, including the selecting the menu language,
scanning channels, connecting to the network, and more.
During each step, either make a choice or skip the step.
You can manually perform this process at a later time in the
System > Setup menu.
- If you connect any device to
installation, the
Channel Source
automatically.
top box
- If you do not want to select
.
Aerial

Selecting the video source

You can select a connected external device using the
SOURCE button.
For example, to switch to a gaming console connected
to the second HDMI connector, press
list, select to change the input signal to HDMI
Source HDMI2
mode. Connector names may vary depending on the model.
The following options are available in the
Button
TOOLS
Select a port connected to an external device, and press and
hold the Enter button. The following functions are available:
- Available options for each connector may vary.
Edit Name
Rename devices connected to the TV for easier
identification of external sources.
For example, you can designate a computer connected
to the TV via an HDMI-DVI cable as
before starting the
HDMI1
will be changed to
Set-
, please select
Set-top box
. From the
SOURCE
screen:
Source
.
DVI PC
English - 13
Password Change
>
System Change PIN
Changing the TV's password.
1. Run and then enter the current password in
Change PIN
the password field. The default password is "0-0-0-0".
2. Enter a new password and then enter it again to confirm
it. The password change is complete.
- If you forgot your PIN code, press the buttons in the
following sequence to reset the PIN to "0-0-0-0":
For the Standard Remote Control: In Standby mode:
→ 8 → 2 → 4 →
MUTE POWER
For the Samsung Smart Control: When the TV turns
→ Volume up →
on:
MUTE
→ Volume up →
RETURN
Alternatively, simply designate a computer connected to
the TV via an HDMI cable as
You can also designate an AV device connected to the
TV via an HDMI-DVI cable as
Information
View detailed information about the connected devices.
Anynet+ (HDMI-CEC)
Displays a list of Anynet+ (HDMI-CEC)-compliant devices
that are connected to the TV.
- This option is only available when
is .
CEC) On
Disconnect USB Device
Used to safely remove a USB device connected to the
TV. This option is only available when a USB device has
been selected.
(On)
→ Volume down →
RETURN
RETURN
PC .
.
DVI Devices
Anynet+ (HDMI-