Menu Lock; Ptz Control; Start Cruise; Record Search - Monacor AHR-40 Bedienungsanleitung

6.3 Menu Lock

Considering a system safety feature you can click
to lock system interface when leaving the DVR. If you want
to login to the DVR again, you would input device code and
password to unlock the interface shown as fig. 6-53.
Friendly Reminder: Administrator has full authority over Main Menu
operations and has an authority to limit common user's operation.

6.4 PTZ Control

Click the icon to enter into [PTZ control] menu shown as
fig. 6-54. Now user can control the camera with Pan, Tilt and
Zoom capabilities.
Fig. 6-54
Click ZOOM −/+ to zoom in / out the image.
Click FOCUS −/+ button to focus the image.
Click IRIS −/+ button adjust iris to open or close.
How to set pre-set point:
Total: Set up pre-set point quantity
Cur Point: Indicates starting point cruised. System default
point is 01. The model support up to 255 pre-set points.
Stop time: Sets the stop time at each point and range is
1 – 255.
GOTO: Allow you go to a specific preset point.
Set: Allow you set a set of specific preset points of a PTZ
camera.
1) Select a camera you desire to set a preset point.
2) Adjust the camera in a desired direction.
3) Click [Set] to set the point as preset point.
4) Click [Save] to save the preset point.
5) Follow the above step to add one more preset point.
Save: Save all the preset points
Clean: Allow you delete one selected preset point.
Note: Up to 254 pre-sets per one camera can be stored. However,
actual preset quantity differs depending on PTZ performance.

6.4.1 Start Cruise

If multiple presets are specified, the PTZ camera will auto-
matically move to the entire preset one at a time whilst user
activates [Start Cruise
please click icon on the [Tool] column.

6.5 Record search

You could enter into [Record Search
menu conveniently and quickly and search/playback the record
histories. We introduced Record search details previously in
Section 6.2.3.1.
46
Fig. 6-53


] options. If you want to stop cruise,
] menu from Pop-up

6.6 Mute

icon Click the icon, or press MUTE button on the front panel
and Remote controller to control the mute of DVR.

6.7 Manual Record

Click the icon, or you also can press button
panel or Remote controller to activate manual record. Please
stop record manually once you activate manual record.
To stop record quickly, please click the icon
button ■ on the front panel or remote controller.

6.8 Start Sequence

In the single mode, when entering into [Start sequence] menu,
auto-sequence will be conducted at the set interval. Details
please refer to chapter 6.2.1.2 on page 37.
7

Web Application Manager

7.1 ActiveX control download
and installation
Open your web browser and input the IP address and web port
of DVR, such as http: // 172.18.6.202:8080/. If your computer
is connected to internet, it will download and install "ActiveX"
Plug-in automatically. If your computer system is Vista, you
may need to setup the user authority. Details please refer to
the below picture: Start  setup  control panel (Tick "√" use
UAC to help protect your computer and confirm OK).
Vista System
Fig. 7-1
Win-7 system
Fig. 7-2
on the Front
●
or stop