Sharp XE-A213 Bedienungsanleitung Seite 25

2. Text programming
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the key to register the item name.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Unit price programming
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
s
(2) Press the key to register the unit price.
Guidance message for the next step will be displayed.
4.
Associated dept. programming (Press
(1) Enter an associated dept. code using numeric key.
For dept. 1 through 6, you may press the
corresponding department key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
s
(2) Press the key to register the associated dept.
code.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
s . / Press
(Press to skip
@
and key moves the cursor to
s
(Press to skip
s
1
QUICK START GUIDE
Part
A
to terminate.)
A
. / Press to terminate.)
A
. / Press to terminate.)
to skip
Part
:
ENTER TEXT
PLU.0071
MELON_
MELON
s
PRICE
500
s
ENTER DEPT#
1
s
ENTER PLU TYPE
2 3
Part
0.00
500
1
PLU
23