Interconnetion Example 5-Channel-Mode: Stereo Front & Rearsystem + Subwoofer - ESX SE5800 Bedienungsanleitung

INTERCONNECTION EXAMPLE 5-Channel Mode: Stereo Front- & Rearsystem + Subwoofer
Connect stereo RCA output (FL/FR and RL/RR) of the headunit with
LINE INPUT CH1 / CH2 and CH3 / CH4 of the amplifier
Connect stereo RCA output (SUB OUT) of the headunit with LINE INPUT CH5 of the amplifier.
SUB-OUT
Speaker
front / left
2 – 8 Ohms
Speaker
front / right
2 – 8 Ohms
REFERENCE NOTE
Do not connect loudspeaker cables with the vehicle's chassis. Always ensure the correct polarity
of all connections. The interchange of plus and minus cause total loss of bass playback and could
damage the speakers.
SE5800
LINE INPUTS & BASS REMOTE
Switch position CH1/2 = HP or FULL
and CH3/4 = HP or FULL
RR/RL FL/FR
MODE = 5 CH
SPEAKER CONNECTIONS
20
Connect the bass remote controller
and the remote terminal on the amplifier
with the enclosed cable.
Speaker
rear / left
2 – 8 Ohms
Lautsprecher
rear / right
2 – 8 Ohms
Subwoofer
1 – 8 Ohms