Analogue Teletext; Recording Via Epg Screen; Programme Options; First Time Installation - Sharp LC-32LE140E Bedienungsanleitung

Digital Teletext (*)
(*) If available in your country
• Press the "TXT" button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext screen.
• When the "TXT" button is pressed, the TV returns
to television broadcasting.
• With digital broadcasting (DVB-T-C), in addition to
digital teletext broadcasting together with the normal
broadcasting, there are also channels with just digital
teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the "TXT" button again, the digital
teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
"TELETEXT" explanations

Recording via EPG Screen

IMPORTANT: To record a programme, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
(RECORD): the TV will start to record the
selected progamme. You can press again to stop
the recording.
Note: Switching to a different broadcast or source is
not available during the recording.
/ : Page left / Page right.

Programme Options

In EPG menu, press the OK button to enter the "Event
Options" menu.
Select Channel
In EPG menu, using this option, you can switch to the
selected channel.
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 16 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 16
Record / Delete Record Timer
IMPORTANT: To record a programme, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to enable
recording feature. Otherwise, recording feature will not
be available.
• After you have selected a programme in EPG menu,
press the OK button and and Options screen will
be displayed. Select "Record" option and press the
OK button. After this operation, a recording becomes
set to the selected programme.
• To cancel an already set recording, highlight that
programme and press the OK button and select
the option "Delete Rec. Timer". The recording will
be cancelled.
Note: You cannot switch to any other channel or
source while there is an active recording on the
current channel.
Set Timer / Delete Timer
After you have selected a programme in EPG menu,
press the OK button and and Options screen will be
displayed. Select "Set Timer on Event" option and press
OK button. You can set a timer for future programmes.
To cancel an already set reminder, highlight that
programme and press the OK button. Then select
"Delete Timer" option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or
more individual events at the same time interval.

First Time Installation

IMPORTANT: Ensure that the aerial or cable is
connected before switching on the TV for the fi rst
time installation.
• When the TV is operated for the fi rst time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
• Use " " or " " buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language,
will be displayed, requiring you to set Country,
Search Type, Teletext Language,Store Mode and
Scan Encrypted options.
English - 16 -
"Welcome!" screen
28.03.2012 19:05:15 28.03.2012 19:05:15