Digital Output Selection - Samsung STB-E7500 Handbuch

Appendix
| NOTE |
\ DTV smart resolution is activated only when resolution option is set to Auto.
\ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message "If no
pictures are shown after selecting Yes, please wait for 15 seconds before returning to the previous resolution. Do you want
to change the resolution?" appears. If you select Yes, the TV's screen will go blank for 15 seconds, and then the resolution
will revert to the previous resolution automatically.
\ If the screen stays blank after you have changed the resolution and then press and hold the @ button on the front of the
product for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to
access each mode and select the Display Setup that your TV will support.

Digital Output Selection

Setup
Connection
Dolby Digital
Dolby Digital Plus
Audio Stream of
Broadcast
MPEG1 Layer 2
HE-AAC
* If the Audio Description is set to On, the output will be PCM 2ch.
** If HE-AAC Source Stream is 2ch or 1ch, Output will be 2ch PCM.
66
|
English
PCM
HDMI supported
Optical
AV receiver
PCM 2ch PCM 2ch
PCM 2ch PCM 2ch
PCM 2ch PCM 2ch
Up to PCM 5.1ch PCM 2ch
Bitstream
(Unprocessed)
HDMI supported
Optical
AV receiver
Dolby Digital* Dolby Digital*
Dolby Digital Plus* Dolby Digital*
PCM 2ch PCM 2ch
Re-encoded DTS** Re-encoded DTS**