Technical Specifications - Dynaudio Sub 250 Bedienungsanleitung

Technical Information/Warranty
Parameter
System
Bass principle
Frequency response
Inputs
• SUB I/O: LFE/Slave In
• SAT/SUB Input
Input impedance
• LFE/Slave In
• SAT/SUB Input
Outputs
• SUB I/O: LFE/To Slave
• SAT Output
Output impedance
• LFE/To Slave
• SAT Output
Mode selector
Phase adjustment
SAT Highpass
SUB Lowpass
Auto ON/OFF
• Automatic ON (LED green)
• Automatic mute (LED red)
Amplifier power
Power consumption
• On (Automatic Mode)
• max.
Woofer
• Cone
• Coil
Dimensions, external
(W x H x D, incl. feet and grille)
Cabinet volume
Weight
Mains
20

Technical specifications

Sub 250 Sub 250 MC
LFE, Slave (phase and volume controls are bypassed in slave mode)
when no signal is detected for 15 to 20 min.
200 W, 4 Ohm 140 W, 4 Ohm
Ø 240 mm / 10", one piece molded MSP (Magnesium Silicate Polymer) cone
Ø 100 mm / 4", pure aluminium voice coil
289 x 294 x 318 mm
11.38" x 11.58" x 12.52"
16.4 litres
Sub 250 SAT
active subwoofer
closed
29 Hz to 250 Hz (± 3 dB)
RCA
right/left full bandwidth, RCA
10 kOhm at 1 kHz
> 8 kOhm at 1 kHz
RCA
right/left, highpass filtered, RCA
100 Ohm
100 Ohm
0°, 180°
Flat, 60 Hz, 80 Hz
50 Hz to 150 Hz
when signal is detected at input
200 W, 4 Ohm
14 W
325 W
10 kg
100 – 120 V, 50/60 Hz, T3.15 A fuse
220 – 240 V, 50/60 Hz, T1.6 A fuse
Sub 250 Compact
200 W, 4 Ohm
266 x 271 x 286 mm
10.47" x 10.67" x 11.26"
13.1 litres
7.2 kg
Dynaudio Sub 250