Troubleshooting - Westfalia ASBS 18 Originalbetriebsanleitung

Troubleshooting

Problem
Red and green LEDs
do not illuminate to
indicate the Battery is
charging correctly
Battery Pack has low
capacity
Combi drill cannot be
switched on (Trigger
Switch (8) does not
move
Operation
Possible Cause
Battery not correctly
connected to Charger
Charger not powered
Battery not being fully
charged
Battery Pack has
been charged over
100 times and
Capacity has started
to reduce
The Forward/Reverse
Switch may be in the
middle ('locked')
position
28
Solution
Clean Battery Socket
of Charger and
Battery Contacts and
fully slide on to
Charger so it clicks in
a locked Position
Recheck Mains
Connection
Do not remove
Battery until a full
Charge is indicated
This is normal for
battery packs.
Contact Westfalia
purchase a replace-
ment battery pack
Slide the For-
ward/Reverse Switch
either to the left or
right