Listening To A Bluetooth Device; Connecting A Bluetooth Device For The First Time - JVC RV-NB75B Bedienungsanleitung

Listening to a BLUETOOTH device

You can listen to music from your BLUETOOTH
device through the System.
When you connect your device for the first time, it
is necessary to register (pair) your BLUETOOTH
device and the System.
NOTE
In order to use these functions, the BLUETOOTH
0
device must support the AVRCP and A2DP
profiles.
Some BLUETOOTH devices may not be
0
available to the System.
Connecting a BLUETOOTH device
for the first time
1
Press the [BLUETOOTH F] button.
Remote control
BT READY
2
Perform the pairing operation on the
target BLUETOOTH device.
On the target device, select "RV-NB75" (this
System) from the available BLUETOOTH
device list.
When the target device requests for
0
password during pairing, enter "0000".
For information on operating the target
0
BLUETOOTH device, see the instruction
manual for the BLUETOOTH device.
Pairing is completed and the target
BLUETOOTH device is connected to the
System automatically. The BLUETOOTH
indicator lights up.
B T
3
0
0
0
Main unit
0
Play/Pause
Stop
Skip
Fast Forward/
Fast Rewind
0
Start playback on the target BLUETOOTH
device.
The sound from the BLUETOOTH device is
emitted from the System. Playback may start
automatically with some BLUETOOTH
devices.
NOTE
Up to five BLUETOOTH devices can be
registered. When the sixth BLUETOOTH device
is registered, registration of the device with the
oldest connection history is deleted.
By pressing [BLUETOOTH F] while "BT
READY" appears on the display window, you
can reconnect the BLUETOOTH device that was
last connected to the System.
For the second and subsequent connections,
the BLUETOOTH device that was last
connected to the System will reconnect only
when its BLUETOOTH function is turned on
while "CONNECT" blinks on the display window.
To reconnect another BLUETOOTH device,
operate the BLUETOOTH device to connect
while "BT READY" appears on the display
window.
While "CONNECT" is blinking, you cannot
perform any operations except for turning the
System off.
To control the BLUETOOTH device from
the System
operation
Press the [BLUETOOTH F]
button.
Each time you press the button,
playback starts/pauses.
Press [o].
Press [J] or
[I].
Press and hold [J] or
[I].
Operation may differ depending on the type of
BLUETOOTH device you are using.
button
17