Private Mask Setup - JVC TK-C655 Bedienungsanleitung

Setting Up the Camera Using an RM-P2580

PRIVATE MASK Setup

Use the PRIVATE MASK screen to set up the private mask function, which grays out areas that are not required to be included in
the monitored picture. Up to four private masks can be set per screen, and up to eight private masks can be set in total.
MENU button
SET button
REMOTE CONTROL UNIT
CAMERA POSITION
SETUP
POWER
ALARM
MENU SET AUTO
KEY LOCK
LENS CAMERA/POSITION
1 2 3
SPEED CAMERA POSI-
TION
4 5 6
IRIS OPTION OPTION
CLOSE OPEN
1 2
FOCUS
NEAR FAR 7 8 9 AUTO AUTO
AF
PAN PATROL
0
WIDE ZOOM TELE CLEAR ENTER
/HOME
TELE ENTER
button button
WIDE button
– – – C A M E R A F U N C T I O N – – –
P O S . T I T L E L O C . U P - L
F L I P D I G I T A L
V A R . P / T S P E E D O N
E A S Y A F O F F
V . S H A R P N E S S N O R M A L
P R I V A T E M A S K . .
– – – P R I V A T E M A S K – – –
M O D E O N
M A S K N O 1 *
M A S K E D I T . .
M A S K D E L E T E . .
– – – M A S K E D I T – – –
P U S H M E N U → S A V E & R E T U R N
– – – M A S K D E L E T E – – –
C A N C E L
D E L E T E
CAUTIONS
●
Depending on the camera direction, a picture may be shot even in the setting private mask area.
●
The private MASK function cannot be carried out during the initializing process immediately after the power is turned on.
●
If the picture being shot contains 5 or more masks, the entire picture is masked.
E-26
RM-P2580
F-1 F-2 F-3
Numeric keys
CAMERA
PAN/TILT
buttons
PAN/TILT
lever
Already set.
1.
Select the camera. (
CAMERA button → Numeric key (camera number) → ENTER button.
The picture of the selected camera is output.
2.
Select the angle of view.
Use the PAN/TILT lever and the lens button to set the viewing angle
to which the private mask function is to be applied.
3.
Display the SETUP menu on the camera.
☞
1
( P. 18, steps to
MENU button (3 sec.) → Select "CAMERA" using the PAN/TILT
lever → SET button.
The camera moves to the home position.
4.
Tilt the PAN/TILT lever up or down to move the cursor
(>) to "CAMERA FUNCTION" and press the SET button.
The CAMERA FUNCTION menu is displayed.
5.
Move the cursor (>) to "PRIVATE MASK" and press
the SET button.
The PRIVATE MASK submenu is displayed.
6.
Select the private mask function ON or OFF.
Turn the private mask function on or off by setting the "MODE" item
in the submenu to ON or OFF (Factory setting: OFF)
7.
Select the mask number.
Select the private mask number from MASK NO. 1 to 8 and move the
cursor on to the item "MASK EDIT." Of these, a maximum of 4 can be set
within one picture.
If an already set mask number is selected, the (
8.
Edit the masking area.
• Move the cursor to "MASK EDIT" and press the SET button to
display the MASK EDIT screen. (The masked area will be dis-
played as a grayed-out area.)
• Tilt the PAN/TILT lever to move the grayed-out area to the centre
of the area to be masked.
• Press the TELE and WIDE buttons to set the masked area size.
CAUTIONS
●
It is not possible to set five or more masks in adjacent areas. (Even when
this is attempted, the masked area that is required to be set will not be
displayed.)
●
MASK cannot be set at lower than approx. 45° in the horizontal direction.
(The masks for new settings are not displayed.)
9.
Press the MENU button.
• The screen returns to the "PRIVATE MASK menu".
• To delete a private masked area, select "MASK DELETE", move the cur-
sor to "DELETE" and press the SET button.
The PRIVATE MASK menu reappears after the data has been deleted.
To cancel deletion, select "CANCEL" and press the SET button.
10.
6
Repeat steps to
11.
Press the MENU button.
The screen returns to the "CAMERA FUNCTION" menu.
☞
RM-P2580 Instruction manual)
4
)
) mark will be displayed.
*
9
for each additional masked area.