JVC KD-SHX851 Bedienungsanleitung Seite 56

Disc/SD card operations
Caution for DualDisc playback
• The Non-DVD side of a "DualDisc" does
not comply with the "Compact Disc Digital
Audio" standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
General
• This receiver has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format and MP3/WMA files
recorded in an SD card.
• When a disc or an SD card has been loaded,
selecting "CD" or "SD" for the playback
source starts playback.
Inserting a disc
• When a disc is inserted upside down, the
control panel moves down, and the disc
automatically ejects from the loading slot.
• If you keep the control panel open for about 1
minute, (beeps sound when the "Beep" setting
is turned "On"—see page 44) the control
panel returns to its previous position.
Playing a disc/SD card
• While playing an audio CD: If a title has been
assigned to the audio CD (see page 46), it will
be shown on the display.
• While fast-forwarding or reversing an MP3 or
WMA track, you can only hear intermittent
sounds.
• While playing an SD card, the playback order
may differ from the one played back using
other SD players.
• This receiver may be unable to play back
some SD cards due to their characteristics or
recording conditions.
56
• This receiver cannot play back mini SD card
and MMC.
• If the inserted SD card does not have the
correct files, you cannot select "SD" for the
playback source.
Playing a CD-R or CD-RW
• Use only "finalized" CD-Rs or CD-RWs.
• This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some CD-Rs or CD-RWs may not play
back on this receiver because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/CD-RW on which the files are
written with "Packet Write" method.
– Improper recording conditions (missing
data, etc.) or media conditions (stain,
scratch, warp, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.