Using The Remote Controller-Rm-Rk50 - JVC KD-BT11 Bedienungsanleitung

Using the remote controller —
This unit can be remotely controlled as instructed here
(with an optionally purchased remote controller). We
recommend that you use remote controller RM-RK50
with your unit.
Installing the lithium coin battery (CR2025)
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Remote sensor
Warning (to prevent accidents and damage):
• Do not install any battery other than CR2025 or its
equivalent.
• Do not leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
RM-RK50
1
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2
• Changes the FM/AM/DAB bands with
• Changes the preset stations (or DAB services)
∞
with D .
• Changes the folder of the MP3/WMA.
• While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to an Apple iPod:
– Pauses or resumes playback with D
– Enters the main menu with
5 ∞ 2
(Now U/D /
selecting buttons.)*
5
* U : Returns to the previous menu.
∞
D : Confirms the selection.
3
Adjusts the volume level.
4
Selects the sound mode (iEQ: intelligent equalizer).
5
Selects the source.
6
For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– Rejects calls if pressed and held.
EXTERNAL DEVICES
5
U.
∞
.
5
U.
3
R/F work as the menu
Continued on the next page
21