Herunterladen Inhalt Inhalt Diese Seite drucken

Personalisation; Setting The Temperature; Setting The Drying Cycle - Indesit IWDD 6145 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash
ting a temperature which is higher than the maximum value set for each wash cycle.

Setting the drying cycle

Turn the DRYING knob to select the desired drying op-
tion. There are two options:
A - Based on time: From 40 minutes to 180.
B - Based on the desired laundry dryness level:
Iron dry
: suitable for clothes which will need ironing
afterwards. the remaining dampness softens creases,
making them easier to remove.
Hanger dry
: ideal for clothes which do not need to be
dried fully.
: suitable for laundry which can be put back in a cupboard without being ironed.
Cupboard dry
If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the
wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this
point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load.
Drying only
Use the cycle selector knob to select a drying cycle (11-12) in accordance with the type of fabric. The desired drying level or
time may also be set using the DRYING knob.
Functions
The various wash functions available with this washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Delay timer
To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period
has been reached. When this option is enabled, the
press the button until the text "OFF" appears on the display.
! This option is enabled with all programmes.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the "Table of wash cycles"). "
water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
! This function may not be used in conjunction with cycles 1, 2, 6, 7, 8, 9, 10, 11, 12, 13,
Extra rinse
By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! This function may not be used in conjunction with wash cycles 11, 12, 13,
. The washer-dryer will automatically prevent you from selec-
Table of Drying times
(guideline values)
Fabric
Load type
type
Clothing of diffe-
Cotton
rent sizes, Terry
towels
Synthe-
Sheets, Shirts, Py-
jamas, socks, etc.
tics
symbol lights up on the display. To remove the delayed start option
" enables you to wash in less time thereby saving
,
.
Max.
Cupboard
Henger
load (kg)
dry
dry
5
180
170
3
140
120
,
,
.
GB
Iron
dry
140
100
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis