Epson EMP-7850 Installationshandbuch Seite 54

2
The first time EMP NS Connection starts after installation. Select the
LAN card that will be used for the connection, and click "OK".
Tip :
Once the current network adapter has been selected in this Switch network screen, this
screen will not be displayed at subsequent EMP NS Connection start-ups. To change the
current network adapter, click the "Extension" button in the Projector selection screen
(screen in Step 3). Clicking the "Switch LAN" button on the Extension screen displays
the Switch network screen.
3 Select the name of the projector that you want to connect, and then click
the "Connect" button.
The projector name is shown in the projector's Connection Stand-by screen.
The icon status meaning differs
according to colour as follows.
Grey: Not connected
Orange:Connected to another
computer
53