Epson EasyMP EMP-745 Installationshandbuch Seite 46

Once the network adapter to use has been selected in this switch network window, this
window will not be displayed at subsequent EMP NS Connection startups. To change
the current network adapter, click the "Extension" button in the projector selection
window (window in Step 3). Click the "Switch LAN" button on the extended function
window to display the switch network window.
• If the IP address has not been set in the projector's network settings, the message
"Performing automatic network configuration..." may be displayed. This is because it
takes some time for the IP address to be determined when the connection to a DHCP
server cannot be made. If the IP address still has not been determined after about 70
seconds have passed since the message appeared, an error message will be displayed.
If this happens, repeat the procedure from step 2.
• If using automatic ESSID search, the message "Projector detection failed." may be
displayed. Refer to the EMP NS Connection help for details on what to do if this
message is displayed.
• If EMP NS Connection is started while PowerPoint is also starting, the message
"Slideshow may not start without rebooting PowerPoint", will be displayed during
startup. If this occurs, close PowerPoint and restart it once EMP NS Connection has
finished starting.
• If the wireless LAN driver for the computer that you are using is not NDIS 5.1
compatible, the message "Wireless LAN unit is not compatible with ESSID free access.
Normal projector detection will be performed." may be displayed when EMP NS
Connection is started while the automatic ESSID search function is enabled. If you
click the "OK" button, the computer will search for the projector with ESSID disabled.
If the computer cannot find a projector to connect to, manually set the ESSID for the
computer. p.29
45