Pioneer XW-BTSP70 Bedienungsanleitung Seite 10

True Wireless Stereo (TWS) feature
You can use one of these units as the speaker for the right side and one
for the left side.
Setting
1. Press the button to turn the unit on. If a Bluetooth enabled device is
connected, disable the connection.
2. On the unit that will be on the right side, press and hold the
and the "+" button for 3 or more seconds until the muting indicator blinks
orange.
0 Make the TWS settings starting with the unit that will be on the right.
If you have already paired devices with one of these units, make that
unit the right side.
3. On the unit that will be on the left side, press and hold the
and the "–" button for 3 or more seconds until the muting indicator blinks
white.
4. When the connection of the right and left side is completed, the muting
indicator lights orange on the right side and white on the left side.
5. Pair Bluetooth enabled devices with the right side device.
10
0 To disable the TWS feature, first turn both units on, then, on either of
the units, press and hold the
seconds. The muting indicator goes out when the feature is disabled.
The feature is also disabled automatically on the other unit, but if the
muting indicator on the other unit does not go out, repeat the above
disabling procedure.
Play
When you operate one of the units, the other unit also operates, allowing
button
you to turn both off or to adjust the volume of both units at the same time.
0 Connect to the unit on the right when you want to play an audio by
connecting to the AUDIO IN jack with the TWS feature.
0 The delay in the playback sound when using the TWS feature increases
compared to when you are using just one unit. The maximum
communication range (distance) is also reduced by about half.
button
and the button for 3 or more