General; Information About The User Manual; Limit Of Liability And Warranty; Legend - LumaSense Technologies IGA 210 Betriebsanleitung

IMPAC pyrometers IS 210 · IGA 210

General

Information about the user manual

Congratulations on choosing the high quality and highly efficient IMPAC pyrometer.
Please read this manual carefully, step by step, including all notes to security, operation and
maintenance before installing the pyrometer. For installation and operation of the instrument
this manual is an important source of information and work of reference. To avoid handling
errors keep this manual in a location where you always have access to. When operating the
instrument it is necessary to follow the general safety instructions (see section 2, Safety).
Additionally to this manual the manuals of the components used are valid. All notes – espe-
cially safety notes – are to be considered.
Should you require further assistance, please call our customer service hotline in Frankfurt,
Germany, +49 (0)69 973 73-0 or Oakland, America +1 201 405-0900 or call from America
800-631-0176.

Limit of liability and warranty

All general information and notes for handling, maintenance and cleaning of this instrument
are offered according to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any exam-
ples or processes mentioned in this manual or in case the content of this document should be
incomplete or incorrect. LumaSense Technologies reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation to notify any
person or persons of such revisions or changes.
All series 210 instruments from LumaSense Technologies have a warranty of two years from
the invoice date. This warranty covers manufacturing defects and faults which arise during
operation only if they are the result of defects caused by LumaSense Technologies.

Legend

Note: The note symbol indicates tips and useful information in this manual.
All notes should be read with regard to an effective operation of the instrument.
Attention: This sign indicates special information which is necessary for a correct
temperature measurement

Terminology

The used terminology corresponds to the VDI- / VDE-directives 3511, page 4.

Copyright

All copyrights reserved. This document may not be copied or published, in part or completely,
without the prior written permission of LumaSense Technologies GmbH. Contraventions are
liable to prosecution and compensation. All rights reserved.

Disposal / decommissioning

Inoperable IMPAC pyrometers have to be disposed corresponding to the local regulations of
electro or electronic material.
3