General Care; Care And Maintenance - Blueair blue PURE 411 Benutzerhandbuch

FILTERS
7 8
Grip the filter Position the new
handles and pull main filter onto the
upwards to remove inner structure. The
the main filter from filter handles should
the unit. face upwards.
10 11
10
Attach the pre-filter Carefully push the
over the main filter. top cylinder down,
The pre-filter should at the same time
only cover the filter rotating it clockwise
shelf, and not the to secure it back into
inner filter ring of the the bayonet lock.
filter holder unit.
12
Plug in your Pure 411
air purifier.
16
9
Press the filter shelf
firmly into position
above the main
filter. The filter shelf
protects the top
edge of the main
filter from damage.
13
Press the touch
button for a duration
of 5 seconds to reset
the filter replacement
timer.
This lets Pure 411
know that you have
changed the filter.
The indicator light
flashes 3 times, and
then changes from
red to white.

General care

Take good care of your Pure 411 to ensure that it delivers optimal
performance.
Vacuum the pre-filter occasionally to remove dust, or wash it
on a gentle, low temperature cycle in the washing machine.
Change the main filter every six months, depending on the
operating conditions. Remember to unplug the unit before
changing the main filter.
When the unit is open to change the filter, vacuum any dust
that may have accumulated inside the unit.
Occasionally wipe the top of the unit with a dry dust cloth.

CARE AND MAINTENANCE

17