Associated Documentation; Supplementary Documentation; Manufacturer's Certificates; Extended Order Code - Pepperl+Fuchs Pulscon LTC50 Betriebsanleitung

Pulscon LTC50, LTC51, LTC57
SI00496O-C
Associated
documentation
Supplementary
documentation
EN
Manufacturer's
certificates

Extended order code

12
This document is an integral part of the following Operating Instructions:
BA01000O, BA01001O, BA01004O
The Operating Instructions pertaining to the device apply.
Explosion-protection manual
EC Declaration of Conformity
see page 3
EC type-examination certificate
Certificate number:
DEKRA 14 ATEX 0117X
IEC Declaration of Conformity
Certificate number:
IECEx DEK 14.0066X
Affixing the certificate number certifies conformity with the standards under www.IECEx.com
(depending on the device version).
• IEC 60079-0:2011
• IEC 60079-11:2011
• IEC 60079-26:2006
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
Device type Basic specifications
LTC5X – X-XXXXX-XXXXX-XX XXXXX
X = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features). The
number of positions depends on the number of features available.
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
Optional specifications
+ XXXXXXXXXX