Manual
1
Safety instructions
➪ When mounting the camera / placing the camera plate, make
sure not to hold fingers within the range of the locking lever
and camera plate receptacle, since the lever may snap back.
➪ When the camera is mounted, the clamping screw of the
fluid head must only be released if camera and tripod are
secured and cannot fall over.
➪ When releasing the vertical brake or the clamping for the
balance plate ensure that the camera is secured against any
sudden movement.
➪ Before transport reset fluid damping to "0".
2
Operating elements
Clamping of the
camera plate
Vertical brake
Horizontal brake
Camera plate
DV 2 II
- 1 -
DV 2 II / DV 4II
Locking lever of the
Touch & Go system
Clamping lever
of pan bar
Vertical setting of fluid damping
Horizontal setting of fluid damping