General Specifications; Battery Life - Megger AVO410 Bedienungsanleitung

MAINTENANCE
To clean the instrument, do not immerse in water, periodically wipe the case
with a damp cloth and mild detergent. Dirt in the terminals may affect readings.
Remove the battery if the AVO410 is not to be used for a long period of time.
When the low battery symbol
To replace battery remove instrument from black boot and unscrew two
screws on battery cover to reveal battery.
An internal user replaceable fuse can be accessed for replacement by unscrewing
the four deep recess screws. Carefully separate the two halves of the tester
taking care of battery lead. Use only the recommended replacement fuse
(10 A 500 V 32 mm).
SPECIFICATIONS

General Specifications

Display:
Polarity indication:
Overrange indication: "OL" or "-OL"
Low battery indication: Displayed when the battery voltage drops below
Auto power off:
Operating ambient:
Non-condensing
Storage temperature:
Temperature coefficient: 0.15 x (Spec.Acc'y) / ºC, <18 ºC or > 28 ºC
Power requirements:

Battery life:

Dimensions (W x H x D):
Weight:
10
appears on the display, replace the battery.
6000 counts updates 1.5/sec.
Automatic, positive implied, negative indicated
operating voltage
Approx 10 minutes
≤10 °C, 11 °C ~ 30 °C (≤80% R.H)
31 °C ~ 40 °C (≤75% R.H), 41 °C ~ 50 °C (≤45%
R.H)
-20 ºC to 60 ºC, 0 to 80% R.H. when battery removed
from meter
Standard 9V battery NEDA 1604, IEC6F22, JIS006P
Alkaline 300 hours
76 mm x 158 mm x 38 mm without
holster
82 mm x 164 mm x 44 mm with holster
522 g