Kronoz ZeNano Handbuch Seite 13

1. Plug the charging cable into the micro uSB charging hole (on the
right side). connect the charging cable to the power supply.
2. After charging, remove the cable from the power supply first, and
then remove the micro uSB from ZeNano.
3. DO NOt remove the charging cable forcedly, or attempt to
plug an improper cable to ZeNano as it might cause damage to
ZeNano.
The Charging indicator on the screen:
• When charging, the red indicator will be on.
• after charging is complete, the indicator will become green.
Low Battery warning
When battery is low, the indicator on the screen will show that the
battery is going off and the ZeNano will alert you. If not connected to
a power source, ZeNano will automatically shut down.
13