Intenso MEDIACREATOR 10 Bedienungsanleitung Seite 10

1) Connect and switch on the digital photo frame
Connect the mains adapter provided with the digital photo frame. Plug the other end of the
mains adaptor into the power outlet. Now move the slider of the digital photo frame into
"On" position to switch on the photo frame.
Please note:
- The plug must be placed next to the device so to be easily accessible.
- Do not open the box of the line adapter. If the box is open, there is danger of life caused by electric shock. The
product does not contain parts to be maintained.
- Actuate the line adapter only with earthed plugs of AC 100-240V~, 50/60 Hz. If you are not sure about the provision
of electricity at the installation point, ask your energy provider.
- Use the included line adapter and line connection cable only.
2) Insert memory cards | connect USB data carriers
The following memory card formats can be used with your digital photo frame:
Note:The digital photo frame is exclusively designed for the use with compatible memory cards and 2.0 data media (100 mA).
with the manufacturer logo facing into your direction.
Secure Digital Card (SD™)
Secure Digital High Capacity (SDHC™)
Multimedia Card (MMC™)
Memory Stick (MS™)
GB - 2
Insert memory cards into the slot
Please note: Never insert cards by use of force!
USB data carriers can only be plugged into
the USB slot in one direction.
Please note: Never insert USB data carriers
by use of force!