Cordless Flash Mode; Remote Master Mode Settings - Metz mecablitz M400 - Sony Bedienungsanleitung

10 Cordless flash mode

In remote flash mode, the maximum flash range is
not indicated on the flash unit's display panel.

10.1 Remote master mode settings

k
Remote master mode can only be used and can only
be set if the camera actually supports that mode.
If the camera does not support remote master
mode, it cannot be set and is automatically deleted.
When operating cameras not supporting remote
master mode, the remote slave mode is automati-
cally activated for the M400. The remote channel
between camera and flash unit is automatically
adjusted.
The type of flash mode for the master and slave
flash units must be selected or set on each flash
unit individually.