Arcam AVR360 Handbuch Seite 30

SaT device Mode
SAT
The z Device Mode button configures the Cr102
to control the functions of a satellite receiver. You will
need to configure this Device Mode to work with your
equipment. Pressing this button also selects as the
SAT
AVr360 source.
Toggles power between standby and on
P
9 Functions as original remote number key.
0
...
Selects Display input on the AVr360.
PHONO
E
Toggles between the available inputs on
TV/AV
your satellite receiver
r
Modifies many keys (see individual key
S
descriptions, below)
Selects multichannel ( ) input on the
MCH
AUX
H AVr360.
+ H selects input on the
SHiFT AUX
AVr360.
Selects input on the AVr360
iPOD
NET
e
+ e selects network ( ) internal
SHiFT NET
input on the AVr360
navigate menus.
confirms a setting (equivalent to 'Enter'
Ok
or 'Select' on some remotes).
M
Controls Backup function, if available.
Performs same function as on original
U
remote, if available.
On some Satellite and Cable set top boxes
D
this key functions as the guide key to open
the EPg (Electronic Program guide).
Toggles the mute function.
@
By default this key operates the AVr360 Mute
Channel down
]
Channel up
[
- + Decrease ( ) or increase ( ) AVr360 volume
– +
) Fast rewind
$ Starts the playback
Toggles pause of playback
&
Fast forward
(
(not used)
!
Stop playback
#
Start recording
%
(not used)
h
Duplicates function of key for some
u
RED
Satellite and Cable set-top boxes
(RED)
Duplicates function of key for some
t
GREEN
Satellite and Cable set-top boxes
(GREEN)
Duplicates function of key for some
o
yEllOW
Satellite and Cable set-top boxes
(yELLOw)
Duplicates function of key for some
b
BlUE
Satellite and Cable set-top boxes
(BLUE)
aV device Mode
AV
The a Device Mode button configures the Cr102 to
control the functions of a television or other display
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects as the AVr360 source.
AV
Toggles power between standby and on.
P
(Some TVs require you to use a number
key to turn them on.)
9 Functions as original remote number key –
0
...
usually for channel selection.
Selects Display input on the AVr360.
PHONO
E
Toggles between the available inputs on
TV/AV
your display device (e.g. TV/AV)
r
Modifies many keys (see individual key
S
descriptions, below)
Selects multichannel ( ) input on the
MCH
AUX
H
AVr360.
+ H selects input on the
SHiFT AUX
AVr360.
navigate setup and programme selection
menus.
confirms a selection (equivalent to
Ok
'Enter' or 'Select' on some remotes).
function on some models.
M
EXiT
Functions as original remote key, if
U
available.
Display InFO or OSD (On Screen Display)
D
function, if available.
Toggles the mute function.
@
By default this key operates the AVr360
Mute
Channel down
]
Channel up
[
Decrease ( ) and increase ( ) AVr360
– +
- +
volume.
Toggles TEXT page on/off
)
TEXT page off
$
Turns Programme-In-Programme (PIP)
&
on, if available
e-28
Activates PIP move, if available
(
Activates PIP swap, if available
!
Activates PIP freeze, if available
#
Activates PIP channel up, if available
%
Activates PIP channel down, if available
h
Duplicates function of key for Text TV
u
RED
(RED)
Duplicates function of key for Text
t GREEN
TV
(GREEN)
Duplicates function of key for Text
o yEllOW
TV
(yELLOw)
Duplicates function of key for Text
b BlUE
TV
(BLUE)