TAPE DECK
GENERAL INFORMATION ON RECORDING
Recording is permissable in so far as copyright or other rights of third parties are not
•
infringed.
This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type
•
cassettes. For recording, use NORMAL (IEC I) type cassettes on which the tabs have not
been broken. The best recording level is set automatically. Altering the VOLUME level will
not affect the recording in progress.
At the very beginning and end of the tape, no recording will take place during the
•
7 seconds, when the leader tape passes the recorder heads.
To protect a tape from accidental erasure, have the
•
tape in front of you and break out the left tab.
Recording on this side is no longer possible.
To record over this side again, cover the tab hole
with a piece of adhesive tape.
TAPEDECK CLEANING AND MAINTENANCE
To ensure quality recording and playback of the tape deck, clean parts [A], [B] and [C] after
approx. 50 hours of
moistened with alcohol or a special cleaning fluid
1. Open the cassette door by pressing
2. Press
and clean the rubber pressure roller [C]
PLAY
3. Press
and clean the magnetic heads [A] and
PAUSE
the capstan [B]
4. After cleaning, press
cassette door.
NOTE:
Cleaning of the heads can also be done by using a special head cleaning cassette.
26
operation or on average once a month. Use a cotton bud slightly
STOP/EJECT
and close the
STOP/EJECT
.