Setting up a new user account (Windows XP)
The Wi-Fi Radio requires a user account to be set up on each PC that
you wish to browse. By default most PCs have at least one user
account. The user name and password (optional) need to be the same
on each PC, as the Internet Radio only stores one user name and one
password. For windows XP this can be set up as follows:
1. From the start menu, select Control Panel > User accounts.
2. From this screen click 'Add ...', and enter the new user name and the
Domain/Workgroup setting noted above. Select the type of user
(restricted) and then select finish.
3. Select the user just created, select 'Reset Password ...' and enter a
password for this user.
4. Note the user name and password.
Note:
For Windows Vista: Users have to turn on the Guest account via
manage user accounts in the control panel, then add access to either
'Everyone' or 'Guest' on the shared drive. You could create a new
account for the internet radio, with a password, if you are concerned
about security. The Guest account has no password by default, so DR
460 will connect to it from its factory default settings.
Configuring a shared drive
From the Start menu select My Computer or Windows Explorer and
navigate to the directory you wish to share. Right click on the folder and
select Sharing and Security. Configure the shared drive as read-only,
and ensure that the user created above has read access to the share.
8.8 Sharing folders on non-Windows computers
It is beyond the scope of this manual to describe how to share folders on
all computer systems. Please refer to your operating system
documentation to find out how to share folders on non-Windows
computer systems. If you configure shared folders with user name and
password security, note these values.
8.9 Setting up DR 460 to work with shared folders
To set up DR 460 to playback audio stored on password-protected
shared network drives, you need to enter a user name and password. To
do this, from Music player mode, select Menu > PC settings >
Username and enter the user name then PC settings > Password and
enter the password.
16