Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMPATIBLE iOS DEVICES
iDJ PRO is compatible with the following iOS devices (not included):
rd
•
iPad (3
generation)
•
iPad 2
•
iPad
iDJ PRO SETUP
1.
Purchase and install djay for iPad from the App Store.
2.
Place iDJ PRO on a flat, stable surface.
3.
Make sure all devices are turned off and all faders and gain knobs are set to "zero."
4.
Connect any additional sound sources (e.g. MP3 players, CD players, etc.) or microphones as
indicated in the connection diagram.
5.
Connect the stereo outputs to power amplifiers, tape decks, and/or other audio sources.
6.
Plug all devices into AC power.
7.
When powering everything on, power on your devices in the following order:
• Additional sound sources (e.g. MP3 players, CD players, etc.)
• iDJ PRO
• Any amplifiers, speakers, or output devices
8.
Open the door of the iPad dock on iDJ PRO.
9.
iPad 2 and iPad (3
iPad: Remove the strips from the sides of the dock, then slide your iPad into the dock.
10.
Connect the dock connector to the dock connector port of your iPad.
11.
Close the door of the iPad dock.
12.
If you have your own Kensington cable, attach this to the Kensington lock to secure iDJ PRO.
13.
Launch djay and start DJ'ing!
14.
When powering everything off, power off your devices in the following order:
• Any amplifiers, speakers, or output devices
• iDJ PRO
• Additional sound sources (e.g. MP3 players, CD players, etc.)
TOP PANEL
33
13
12
16
14 15
1.
iPad Dock – Dock connector for connection with iPad (not included).
2.
Browser Knob – Press this knob to call up the song library. Rotate to cycle through songs. Press "Load" to
then direct songs to a deck.
3.
Load Deck A – Loads the selected track to Deck A.
4.
Load Deck B – Loads the selected track to Deck B.
5.
Shift – Allows alternate button commands to be triggered when pressed first along with other buttons.
6.
View – Cycles between the different views inside the software.
7.
Play/Pause – This will engage playback and pause playback when pressed again. When Shift + Play/Pause is
pressed, the track will momentarily play in a reverse direction. When Play is released, the track will return to
playing in a forward direction. The Play button will begin blinking when the playback of the track on the
associated deck has 30 seconds left.
rd
generation): Slide your iPad into the dock.
30 29 28
23
17 18 19
20 21 22
24
25
11
32
10
10 10
26
9
8
7
1
32
6
5
3
2
4
27
3
30 29 28 31
23
17 18 19
24
20 21 22
25
11
12
10 10 10
26
9
8
7
14 15
13
16
Werbung
Inhaltsverzeichnis
