Hdmi (Arc) Connection; Bluetooth; Interruption Of The Connection - Silvercrest SSB 36 B2 Bedienungsanleitung

BB58B6RXQGEDUB%ERRN 6HLWH  )UHLWDJ  $SULO    
Adjusting the tone quality
The tone quality can only be changed in the mode "Music".
The settings are not stored when you change into a differ-
ent mode
• Press one of the buttons|19 to select the presets for the
tone quality for music (MUSIC), films (MOVIE) or dia-
logue (DIALOG).
• Only in the mode "Music": use the TREBLE –/+
buttons|26 to adjust the treble sounds.
If MOVIE or DIALOG is activated, an automatic
change to MUSIC takes place.
• Only in the mode "Music": use the BASS –/+|22
buttons to adjust the bass sounds.
If MOVIE or DIALOG is activated, an automatic
change to MUSIC takes place.

6.3 HDMI (ARC) connection

Definition
- HDMI stands for High Definition Multimedia Interface.
Via this transmission route, digital images and audio
signals can be transmitted.
- HDMI (ARC - Audio Return Channel) means that the
cable is provided with an ARC channel. Via this chan-
nel, audio signals are transmitted in both directions.
The following modern devices are usually provided with an
ARC output: television sets, games consoles or digital re-
ceivers. In the following, the connection to a television set
is described.
Via the ARC channel of the HDMI cable, digital audio sig-
nals can be transmitted from the source device (e.g. televi-
sion set) to the soundbar.
The audio transmission via the HDMI (ARC) socket|8 can
only work if all components are ARC-enabled. If the trans-
mission is unsuccessful, you must take one or possibly sev-
eral of the following items into account:
• The old HDMI cable must be replaced with a new
ARC-enabled cable.
• Not every HDMI socket on the television set needs to
support ARC. In this case, the HDMI cable on the tele-
vision set must be connected to another ARC-enabled
HDMI socket. Usually, the respective HDMI sockets are
labelled with ARC. If not, refer to the user instructions
of your television set.
• For several television sets, the digital audio output must
be activated. Select the audio output PCM 2.0 (PCM
stereo).
1. Connect the socket HDMI (ARC)|8 by means of an
ARC-enabled HDMI cable to an HDMI ARC socket of
your television set.
2. Switch on the soundbar with the POWER
ton|28.
3. By pressing the HDMI (ARC) button|17, select the
HDMI input.
4. Switch on the television set. When the connection is es-
tablished for the first time, it may take several seconds
until sound is output from the soundbar.

6.4 Bluetooth

Establishing connection
NOTES:
• The identification of the device is "SSB|36|B2".
• After it has been switched over to Bluetooth, the device
automatically attempts to establish a connection with
the last paired device.
• Please observe that the establishment process of the
connection may vary slightly depending on the device
and the software used.
1. Press the button|15 to switch over to a Bluetooth
connection. LED|1 flashes blue.
2. Switch on the audio device (e.g. smartphone) and start
the Bluetooth connection.
3. The audio device will now receive the device identifi-
cation "SSB|36|B2". If nothing happens, press the but-
ton PAIR|5 on the device or the
remote control for approximately 1 second. The blue
LED|1 flashes rapidly.
4. Establish the connection with the soundbar on the au-
dio device. If you are asked for a password, enter
"0000". Both devices are now interconnected. LED|1
now lights up in blue and a beep is heard.
NOTE: usually, audio devices remember the identification
of the device. In this case, it may not be necessary to es-
tablish the connection manually again if the Bluetooth func-
tion is activated.
5. Now play a song on the audio device. The sound is
played back from the soundbar.
6. With the I WW |25,
can select and control the music tracks.

Interruption of the connection

The connection is interrupted if
... one of the devices is switched off;
... the Bluetooth function is switched off;
... the range (approx. 10 metres) is exceeded;
... you press the
LED is flashing. In this case, a new connection to an-
other device can be established immediately.
but-
button|15 on the
XX I|21 and X /II|24 buttons you
buttons|15 or PAIR|5 until the blue
GB 37