Control Change; Midi-Datenformat - Yamaha P-105 Handbuch

MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H–78H = A-2–C8 /
Receive: 00H–7FH = C-2–G8)
vv = Velocity (Key ON = 01H–7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk = Note number: 00H–7FH = C-2–G8
vv = Velocity

2. CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range
(1) Bank Select
ccH Parameter
00H Bank Select MSB
20H Bank Select LSB
Bank selection processing does not occur until receipt of next
Program Change message.
(2) Modulation (reception only)
ccH Parameter
01H Modulation
(3) Main Volume
ccH Parameter
07H Volume MSB
(4) Panpot (reception only)
ccH Parameter
0AH Panpot
(5) Expression
ccH Parameter
0BH Expression MSB
(6) Damper Pedal/Sustain
ccH Parameter
40H Sustain MSB
(7) Sostenuto
ccH Parameter
42H Sostenuto
(8) Soft Pedal
ccH Parameter
43H Soft Pedal
(9) Harmonic Content (reception only)
ccH Parameter
47H Harmonic Content
(10) Release Time (reception only)
ccH Parameter
48H Release Time
(11) Attack Time (reception only)
ccH Parameter
49H Attack Time
(12) Brightness (reception only)
ccH Parameter
4AH Brightness
(13) Portamento Control (reception only)
ccH Parameter
54H Portamento
(14) Effect1 Depth (Reverb Send Level)
ccH Parameter
5BH Effect1 Depth
Adjusts the reverb send level.
(15) Effect3 Depth (Chorus Send Level)
ccH Parameter
5DH Effect3 Depth
P-105 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
Data Range (vvH)
00H:Normal
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...3FH:off, 40H...7FH:on
Data Range (vvH)
00H...3FH:off, 40H...7FH:on
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
(16) RPN
65H RPN
64H RPN
06H Data Entry
26H Data Entry
60H Data
61H Data
* Parameters that are controllable with RPN:
• Coarse Tune
• Fine Tune
• Pitch Bend Range
3. MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
(1) All Sound Off (reception only)
ccH Parameter
78H All Sound Off
(2) Reset All Controllers (reception only)
ccH Parameter
79H Reset All Controllers
Resets controllers as follows.
Controller
Expression
Sustain
Sostenuto
Soft Pedal
(3) Local Control (reception only)
ccH Parameter
7AH Local Control
(4) All Notes Off (reception only)
ccH Parameter
7BH All Notes Off
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the sustain or sostenuto pedal
will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH Parameter
7CH Omni Off
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH Parameter
7DH Omni On
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH Parameter Data Range (vvH)
7EH Mono 00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH Parameter
7FH Poly
Same processing as for All Sound Off.
• When Control Change is turned OFF, Control Change messages
will not be transmitted or received.
• Local on/off, OMNI on/off are not transmitted. (The appropriate note
off number is supplied with "All Note Off" transmission).
• When a voice bank MSB/LSB is received, the number is stored in
the internal buffer regardless of the received order, then the stored
value is used to select the appropriate voice when a program
change message is received.
• Poly mode is always active. This mode will not change when the
instrument receives a MONO/POLY mode message.
MSB
LSB
MSB
LSB
Increment
Decrement
Data Range (vvH)
00H
Data Range (vvH)
00H
Value
127 (max)
0 (off)
0 (off)
0 (off)
Data Range (vvH)
00H (off), 7FH (on)
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H