Turning The Alarm On/Off - Yamaha ISX-B820 Restio Handbuch

USING THE ALARM FUNCTION

Turning the alarm on/off

Top panel
Operations while playing back alarm sound
At the set time, the alarm sound is played back. During playback, the following operations are available.
Top panel
2
16
En
AUTO 2 SET 2 BEEP
1 1
DIMMER CLOCK
USB LABEL SIDE
VOLUME SOURCE ALARM SNOOZE SLEEP
1
AUTO 2 SET 2 BEEP
1 1
DIMMER CLOCK ALARM
USB LABEL SIDE
VOLUME SOURCE ALARM SNOOZE SLEEP
2 1
1
Press ALARM.
When the alarm is on, the alarm indicator (
SOUR
and the alarm time is shown for a while. If you press ALARM
ALARM
again, the alarm indicator (
y
The alarm setting will be saved even if the alarm is turned off. If the
alarm is turned on again by pressing ALARM, the alarm will sound
with the previously alarm settings.
1
(if you want to stop the alarm for a short time) Press
SNOOZE/SLEEP.
SOUR
SNOOZE will stop the alarm and resume again in 5 minutes.
y
• When SOURCE + BEEP is set, press SNOOZE/SLEEP once to
stop the beep sound, and twice to stop the audio source. 5 minutes
after the audio source is stopped, it will start fading in again and the
beep sound will resume.
• The alarm indicator will flash when the snooze function is activated.
2
(if you want to turn the alarm off) Press ALARM or
.
y
The alarm stops automatically after 60 minutes unless you stop the
alarm.
) is shown,
) and the alarm will turn off.