Bluetooth Playback; Connecting And Deleting Bluetooth Devices; Playing Music Via Bluetooth; Aux Playback - Sonoro sonoroSTEREO Bedienungsanleitung

Repeating all tracks
All tracks on the CD are played repeatedly. This func-
tion is terminated when you switch modes or eject
the disc.
Shuffle
The tracks on the CD are played in random sequence.
This also happens when you press [Next] or
[Previous]. This function is terminated when you
switch modes or eject the disc.
CD Resume
The CD will resume playback from the last played
position, even if you have switched modes or
switched the device to Standby mode. This function is
terminated when you eject the CD. This function is
intended for audio books, for example.
13

Bluetooth playback

Mobile phones and other Bluetooth-enabled devices
can be connected to the sonoroSTEREO via Bluetooth.
i
Consult the manual of your mobile phone or your
Bluetooth‐enabled device for help.
Fig. 42: Setting Bluetooth mode
1. Switch on the sonoroSTEREO.
2. Press the [MODE] button on the front of the
device until the device shows the [Bluetooth]
symbol on the display. You can also press the
[Bluetooth] button on the remote control.
ð The Bluetooth mode is now active (Fig. 42).
3. Connect your mobile phone or your Bluetooth-
enabled device to the sonoroSTEREO via Blue-
tooth.
i
The sonoroSTEREO can store up to 8 Bluetooth‐
enabled devices and connects automatically to
previously configured devices if Bluetooth is acti‐
vated.
13.1 Connecting and deleting Blue-
tooth devices
Connecting Bluetooth-enabled devices
Fig. 43: Searching for Bluetooth
1. Activate Bluetooth mode.
ð The display will show [Searching] and the
[Bluetooth] symbol will flashing (Fig. 43).
2. Connect your mobile phone or your Bluetooth-
enabled device to the sonoroSTEREO via Blue-
tooth.
ð After connecting, the display will perma-
nently show the [Bluetooth] text.
Deleting connected devices
3. 3. Press and hold the [Stop] button on the front
of the sonoroSTEREO to delete the Bluetooth-
enabled device and interrupt the connection.
13.2

Playing music via Bluetooth

Starting playback
1. Press the click wheel or the [Play/Pause] button
on the front of the sonoroSTEREO or on the
remote control to start playback.
Pausing playback
2. To pause playback, press the click wheel or the
[Play/Pause] button again.
i
The operation of an external device using the but‐
tons on the sonoroSTEREO is possible to a limited
extent.
14

AUX playback

Using an RCA cable, you can connect and play addi-
tional audio devices via the AUX 1 port. Using a
3.5mm jack plug, you can connect additional audio
devices to the sonoroSTEREO via the AUX 2 port.
Fig. 44: Activating AUX playback
1. Switch on the sonoroSTEREO.
97