Princess 103300 Handbuch Seite 11

• Clean the appliance after each use:
­ Remove any residues with a paper towel.
­ Clean the grill plate with a soft, damp
cloth. Thoroughly dry the grill plate with
a clean, dry cloth. Thoroughly dry the
thermostat socket with a clean, dry cloth.
­ Clean the thermostat with a soft, damp
cloth. Thoroughly dry the thermostat
with a clean, dry cloth.
­ Clean the spatula in soapy water. Rinse
the spatula under running water.
Thoroughly dry the spatula with a clean,
dry cloth.
Description (fig. A)
Your 103300 Princess Table Grill has been
designed for frying or grilling food without
using fat. The appliance is equipped with a grill
plate with a non­stick coating. The appliance is
equipped with a thermostat that keeps the
grill plate at the required temperature. The
appliance is suitable for domestic use only.
1. Thermostat
2. Thermostat dial
3. Thermostat socket
4. Handgrip
5. Grill plate
6. Drainage point
7. Drip tray
Warning!
­ Always fully insert the thermostat into the
thermostat socket.
Initial use (fig. A)
Warning!
­ Make sure that there is sufficient space
around the appliance to allow heat to
escape and provide sufficient ventilation.
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Place the appliance on a stable and flat
surface.
• Insert the thermostat (1) into the
thermostat socket (3).
• Insert the mains plug into the wall socket.
• Turn the thermostat dial (2) to the
maximum temperature.
• Wait for a few minutes until the temperature
indicator goes off. The grill plate (5) has
reached the required temperature.
• After use, remove the mains plug from the
wall socket and allow the appliance to cool
down completely.
Note: If you switch on the appliance for the
first time, the appliance may emit a little smoke
and a characteristic smell for a short period.
This is normal operation.
Use
Switching on and off (fig. A)
• To switch on the appliance, insert the mains
plug into the wall socket. The temperature
indicator remains on while the grill plate
(5) is being heated. The temperature
indicator goes off when grill plate (5) has
reached the required temperature.
• While the appliance is switched on, the
temperature indicator will illuminate and
extinguish as the thermostat (1) switches
on and off to maintain the required
temperature.
• To switch off the appliance, turn the
thermostat dial (2) fully counterclockwise
and remove the mains plug from the wall
socket.
Setting the temperature (fig. A)
• Turn the thermostat dial (2) clockwise to
increase the temperature of the grill plate
(5).
• Turn the thermostat dial (2) counterclockwise
to decrease the temperature of the grill
plate (5).
Hints for use (fig. A)
• Prepare the food.
• Place the appliance on a stable and flat
surface.
• Clean the grill plate (5) with a soft, damp
cloth.
• Insert the thermostat (1) into the
thermostat socket (3).
• Insert the mains plug into the wall socket.
• Turn the thermostat dial (2) to the
required temperature.
11