Herunterladen Inhalt Inhalt Diese Seite drucken

When The Work Is Done; Changing The Dust Bag - Siemens VS07 series Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für VS07 series:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en
10*
Figure
Vacuuming with accessories
(attach to handle or suction pipe as
required).
a) Crevice nozzle
For cleaning crevices and corners.
b) Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
c) Furniture brush
For vacuuming picture frames, books,
delicate furniture, etc.
d) Hard-floor brush
For cleaning hard floor coverings
(tiles, parquet flooring, etc.)
11
Figure
Small accessories that you do not
need can be stored in the vacuum
cleaner lid.
12
Figure
You can use the parking aid on the
back of the appliance during short
pauses in vacuuming after switching
off the vacuum cleaner.
To do this, slide the catch on the floor
tool into the groove on the back of the
appliance.

When the work is done

Figure
13
Rewinding the power cord.
Tug the power cord and let go (the
cable automatically rewinds).
Figure
14
To store or transport the vacuum
cleaner, use the storage aid on the
underside of the cleaner.
Stand the vacuum cleaner up on its
end.
12
Slide the catch on the floor tool into the
groove on the underside of the
appliance.

Changing the dust bag

Replacing the dust bag
15
Figure
If the dust bag change indicator in the
cover is completely yellow when the
floor tool is lifted off the floor and the
highest suction setting is selected, the
dust bag must be replaced even if it
should not be completely full yet. In
this case it is essential to change the
dust bag due to the type of material it
contains.
The nozzles, suction pipe and flexible
hose should not be blocked, as this
will also trigger the dust bag change
indicator.
16
Figure
Open the cover by moving the locking
lever in the direction of the arrow.
17
Figure
a) Seal and remove the
MEGAfilt
SuperTEX dust bag by
®
pulling on the tab as shown.
b) Place a new MEGAfilt
bag in the holder and close the dust
bag compartment lid.
Caution: The cover only closes
!
when a MEGAfilt
has been inserted.
Cleaning the motor protection filter
The motor protection filter should be
cleaned at regular intervals by tapping it
or washing it out.
SuperTEX dust
®
SuperTEXdust bag
®

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis