Put In The Batteries (Always Use New Batteries); Functions Of The Keys - SMART sliderX Bedienungsanleitung

TV code can be programmed under the TV mode key). The STB mode is dedicated to your
smart receiver; it is not possible to reprogram this mode key.
After programming the sliderX for a certain unit, you can only operate this unit, if you
pressed just before the appropriate mode key!
3

Put in the batteries (always use NEW batteries)

1. Open the cover on the back of the smart sliderX.
2. Insert two AA batteries (1.5Volts) and verify they are placed correctly with the + on the bat-
tery in the same position as marked inside the battery compartment.
4

Functions of the keys

No. Key
1 LED indica-
tor
2
3
4 STB,
TV,
DVD,
AMP
5 0 - 9
No. Key
RECALL
6
7 TV/RADIO
8 FAV
9 TXT
smart sliderX
Function
The indicator light flashes
when the remote is operating
or lights continuously while
you are programming the
remote.
Mute, turns on/off the sound
of the selected equipment.
Power, switches on / off the
selected device.
Select the device you wish to
control. The STB allows you
to control your smart STB. It
is not possible to reprogram
this mode key to use another
type of device.
Direct access to channels,
Device Code selection and
alphanumeric text entry (T9).
Function
Switches to previous channel.
STB Mode: Switches between TV mode and Radio mode.
Other mode: This button allows you with some equipment and brand to
select directly 2 digit channels.
STB Mode: Opens favorite list.
Other modes: Text Hold.
Starts Teletext (on some equipment stops also the Teletext).
Put in the batteries (always use NEW batteries)
11