Vacuum Cleaning; Adjusting Suction Power - Philips HR 8981 Vision duet Handbuch

unique utilization. For example for the cleaning of difficult to reach
places such as behind radiators or in cars, for thorough cleaning of
parquet and marble, or for deep cleaning of carpets.There is even an
accessory package for the care of dogs or cats, which makes it easy
to remove dead hair and knots.Ask your service dealer.

Vacuum cleaning

C
1 Pull the cord out of the appliance and put the mains plug into
the wall socket.
C
2 Start the appliance by pushing the on/off switch on the cover
(you can use your foot).

Adjusting suction power

You can adjust the suction power while vacuum cleaning:
Use the slide control on top of the appliance.
3 Switch to MAX for maximal suction power.
Use MAX power for very dirty carpets and hard floors.
4 Switch to MIN for minimal suction power.
Use MIN power for curtains, table carpets, etc.
C
Some types are equipped with an infrared remote control.
With the infrared remote control you can adjust the suction power
with 5 speeds.When switched on, the appliance always starts with the
highest power.
C
By pushing the - knob, the speed decreases with one level.
ENGLISH
5