Benning CFlex 2 Bedienungsanleitung Seite 10

Flexible digital TRUE-RMS AC current transformer for AC current measurement
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CFlex 2
9. Maintenance
10. Environmental note
1. User notes
These operating instructions are intended for
- qualified electricians and
- electrotechnically trained persons.
The BENNING CFlex 2 is intended for making measurements in dry environment. It must not be
used in power circuits with a nominal voltage higher than 600 V AC CAT IV/ 1000 V AC CAT III
(More details in Section 6. "Ambient conditions").
The following symbols are used in these operating instructions and on the BENNING CFlex 2:
Application around and removal from NON-INSULATED HAZARDOUS LIVE
conductors is NOT permitted.

Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating instructions must
be followed with in order to avoid risks.
This symbol on the BENNING CFlex 2 means that the BENNING CFlex 2 is totally

insulated (protection class II).
This symbol on the BENNING CFlex 2 means that the BENNING CFlex 2 complies
with the EU directives.

(AC) Alternating voltage or current.
Ground (Voltage against ground).
07/ 2014
Operating Instructions
BENNING CFlex 2
BENNING CFlex 2

6