Kärcher SE 2001 Bedienungsanleitung Seite 10

English
Push the accessory holder into its mounting
until it snaps into place.
For dry vacuuming insert paper filter bag.
Put the motor housing on the dirt box and
lock it in place (turn the locking knobs
counter-clockwise as far as possible).
Connecting the accessories
Insert spraying and suction hose, and press
until it snaps into place.
Connect coupling on spraying and suction
hose, and press until it snaps into place.
Attach required accessory to spraying and
suction hose or to suction tubes. If necessary
engage the catch.
Note: The appropriate additional accessory to be fitted
depends upon the actual cleaning task. Read the next
section of these instructions for further information.
Wet cleaning
Carpets/Hard surfaces
(Spraying on cleaning agents and vacuuming
them off in one continuous process)
Attention: Do not clean parquet floors in this way
(moisture can penetrate the material and damage the
floor).
Accessories required
– Spraying and suction hose with handle
– Suction tubes (e.g. for cleaning the floor)
– Spray-hex nozzle without hard-surface
adapter for carpets
– Spray-hex nozzle with hard-surface adapter
for hard surfaces.
Mixing a detergent solution
Attention: Avoid any damage to health or property
by observing all the information provided with the
cleaning agents that are to be used.
■ Removal of mites:
To eliminate mites we recommend our
specially developed cleaning agent Mitex
RM 765. Depending on the textile type, tests
show that mites are removed for 6 - 9
months.
■ For cleaning please use only the original
Kärcher cleaning agent RM 519. This is
suitable for all textile cleaning processes.
10
■ Dissolve half of the supplied test pack (or 1/
2 the RM 519 measuring beaker) in 5 litres of
water and pour this mixture into the detergent
reservoir.
■ Empty dirt box
■ Work without paper filter bag fitted
■ Fit detergent reservoir
■ Mount motor housing onto dirt box, and lock
in place
■ Plug into mains socket
■ Switch on suction turbine
■ Switch on spray pump
Attention: If the detergent reservoir is empty, switch
off the spray pump (pump could become damaged). If
you are not working with the pump, switch this off at
the ON/OFF switch.
■ To spray detergent – press and hold button
on handle.
■ Place spray-hex nozzle on floor, and draw
backwards along surface to be cleaned. Tiles
are best cleaned diagonally across the joints.
Tips for working with the cleaner
■ Badly stained areas should be sprayed
separately, and the detergent left to soak in
for 5–10 minutes.