Troubleshooting - Panasonic CF-VDW07 Bedienungsanleitung

Troubleshooting

When a problem occurs, refer to this page. If a problem appears to be related to a software
application, read the software related manual. If you still cannot troubleshoot the problem,
contact Panasonic Technical Support.
N o d i s p l a y a f t e r
powering on
An afterimage appears
"Connection timeout" is
displayed
E
"No server found" is
displayed
"Authentication failed"
is displayed
"Too many clients" is
displayed
"Illegal data received"
o r " I n i t i a l i m a g e
receiving timeout" is
displayed
Software keyboard has
been closed
An afterimage appears
(i.e., green, red, and blue
d o t s r e m a i n o n t h e
display) or there are dots
n o t d i s p l a y i n g t h e
correct colors
32
Has the computer or wireless display been set to the
power-saving mode?
To resume operation of your computer from the condition
the power of the display is off (for energy conservation
purposes), touch the screen.
If an image is displayed for a prolonged period of time,
an afterimage may appear. Set the screensaver.
Confirm the IP address, subnet mask, network type,
and SSID settings on both the computer and the
wireless display.
Confirm the operation of the wireless LAN on the
computer.
Put the wireless display close to the computer.
Confirm that is on the taskbar.
Confirm the IP address of the computer that has been
set on the wireless display.
Confirm the password for both the computer and the
wireless display.
Disconnect the wireless display during operation and
reestablish the connection.
Confirm whether the network is working properly or
not.
Restart the computer.
Select [Start] - [Programs] - [Panasonic] - [Software
Keyboard].
High-precision and advanced technologies are necessary
in the production of color liquid crystal displays (color
LCDs). Therefore, if 0.002% or less of the picture
elements either fail to light or remain constantly lit (that
is, more than 99.998% of elements are functioning
properly), no defect is considered to exist.