Cleaning; When The Appliance Is Not In Use; How To Change The Bulb - SANTO SK 78803-6I Gebrauchsanweisung

right at this moment the paper will tear and it can cause clogging up in
the outlet by getting into it. So you are asked to be careful - because of the
above - when placing foods wrapped in paper into the appliance.
In case of increased demand e.g. during heatwaves, the refrigerator
temporarily happens to operate constantly - during this the automatic
defrosting is ineffective.
Remaining small ice and frost stains on back plate of the cooling
compartment after defrosting period is not abnormal.

Cleaning

NEVER use detergents, abrasive powders, highly perfumed cleaning
products or wax polishes to clean the interior as these will damage the
surface and leave a strong odour.nie Metallgegenstände um das Gerät zu
reinigen, da es beschädigt werden könnte.
Clean the inside with warm water and bicarbonate of soda. Rinse and dry
thoroughly.
To guarantee a safe operation of the fridge, once a year remove the
ventilation grill at the base and clean the air channels with a vacuum cleaner.

When the appliance is not in use

Disconnect the appliance from the electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent
unpleasant smells.

How to change the bulb

Should the light fail to work you can change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the
lamp cover, then take the lamp cover
off in the direction of arrow and the
bulb can be changed. (Type of the bulb:
Mignon 322, 230 V, 15 W, E 14 thread)
After changing bulb replace the lamp
cover, screw the plate screw and apply
voltage to the appliance.
The lack of light does not influence operation of the refrigerator.
26
Never use metal objects for cleaning your appliance as it may get
damaged.