Using Other Nozzles (Accessories) - Dirt Devil Infinity V12 eco Star Collection Bedienungsanleitung

2 Assembly
2.3 Using other nozzles
(accessories)
1
2
Fig. 5
1
2
Fig. 6
1
Fig. 7
1
Fig. 8
Fig. 9
28
Together with the floor nozzle just installed, you can ex-
pand the range of functions of your appliance with other
nozzles.
The 2-in-1 combi nozzle and the crevice nozzle are includ-
ed in the package as accessories. They can be attached
to the accessory bracket (Fig. 5/1).
„
Crevice nozzle (Fig. 5/2): Use these accessories to
3
vacuum dust from hard to reach places.
„
The 2-in-1 combi nozzle (Fig. 5/3) is used as a:
- Furniture brush (Fig. 6/1): Use this nozzle to re-
move dust from objects with delicate surfaces (e. g.
cupboards and tables).
3
- Upholstery nozzle (Fig. 6/3): By simply taking off the
brush attachment (Fig. 6/2) you can transform the 2-
in-1 combi nozzle into an upholstery nozzle (Fig. 6/3).
Use this to clean soft, scratch-resistant surfaces (e. g.
upholstered furniture).
Optionally available (i.e. included in the scope of delivery
2
depending on model and features):
„
Parquet brush (Fig. 7/1): Its long bristles make it espe-
cially suitable for cleaning delicate surfaces (e. g. par-
quet and laminate floors).
„
Turbo brush (Fig. 7/2): This has a rotating brush head
and is therefore ideally suited for deep-cleaning car-
pets.
„
"Fellino" mini turbo brush (Fig. 8/1): is used to vacu-
um non-sensitive carpets, runners, mats, and the like.
„
"Fello" pet hair turbo brush (Fig. 8/2): is used to vac-
uum non-sensitive upholstery, runners, mats, and the
like.
„
Long, flexible crevice nozzle (Fig. 9): is used to vac-
uum non-sensitive carpets, runners, mats, and the like.
2
NOTE:
When you use the long, flexible crevice nozzle, under
certain circumstances the pressure inside the vacuum
cleaner might drop too far thus triggering the safety
valve. The signal for this is e.g. a whistling noise
(depending on the vacuum cleaner model) and greatly
reduced suction performance. In this case, you must
open the bypass vent (Fig. 1/3) until the valve no longer
triggers.